Constructed of extruded aluminum beam with T-slots for easy attachment of jig, vise or other devices.
24V DC servo controlled, belt-driven.
This unit is certified for CE safety compliance.
Extruded aluminum beam with T-slots for easy assembly and attachment of mounting jig, vise or other devices.
Dimensions: L= 494 mm, W=180 mm, H=65 mm (L=19.5″ W=7″ H=14.5″)
Overall travel: 284 mm (11.2″)
Pre-drilled holes for mounting linear table on workbench.
2 linear tables can be combined to create an XY-positioning table.
200 mm/sec (7.9″/sec)
¬±0.2 mm (¬±0.08″)
5 kg (11.0 lb)
Drive and control
24V DC motor with high resolution optical
Controlled by axis driver in robot controller via software
Position control at all points of travel
19.5:1 gear ratio
Can be attached to either end of positioning table
Dimensions: 150 x 90 mm (5.9″ x 3.5″)
Molded plastic tray with peg holes for creating fixtures
11 x 7 peg hole matrix; offset distance between peg holes: 12.5 mm (0.5″)
Additional included components
8 pins (different sizes and shapes) for creating fixtures on stage
Certified for CE safety compliance.