Constructed of extruded aluminum beams with T-slots for easy attachment of jig, vise or other devices.
24V DC servo controlled, belt-driven.
This unit is certified for CE safety compliance.
Extruded aluminum beams with T-slots for easy assembly and attachment of mounting jig, vise or other devices.
Dimensions: L=494 mm, W=494 mm, H=115 mm (L=19.5″, W=19.4″, H=14.5″)
Overall travel: 284 mm x 284 mm (11.2″ x 11.2″)
Pre-drilled holes for mounting XY table on workbench.
XY table can be separated into two individual axes for use as linear positioning devices.
280 mm/sec (11″/sec)
¬±0.28 mm (¬±0.011″)
5 kg (11.0 lb)
Drive and control
24V DC motor with high resolution optical encoder on each axis
Controlled by 2 axis drivers in robot controller via software
Position control at all points of travel
19.5:1 gear ratio
Can be attached to either end of the Y-axis beam
Dimensions: 150 mm x 90 mm (5.9″ x 3.5″)
Molded plastic tray with peg holes for creating fixtures
11 x 7 peg hole matrix; offset distance between peg holes: 12.5 mm (0.5″)
Additional included components
8 pins (different sizes and shapes) for creating fixtures on stage
Certified for CE safety compliance.