The table is normally driven by the robot controller as a servo axis, but can be directly operated in open-loop by connecting to a ¬±24V power supply.
The table surface has a pegboard design. Different size pins can be set into the peg holes and easily rearranged to create fixtures for holding objects of various shapes and sizes.
This unit is certified for CE safety compliance.
Black anodized aluminum
Pegboard design for creating part-holding fixtures
Pre-drilled holes for workbench mounting
Table base: dia.=240 mm, H=190 mm (dia.=9.4″, H=7.5″)
Rotary plate: dia.=350 mm, H=5 mm (dia.=13.8″, H=0.2″)
Drive and control
24V DC servo motor with high resolution optical encoder
508:1 gear ratio
Controlled by axis driver in robot controller via software
Variable travel speed
Can be operated in open-loop by connecting directly to a ¬±24 V power supply
Additional included components
3.5 m (138″) cable with D9 connector for connection to axis driver in robot controller
25 pins (5 different sizes and shapes) for creating fixtures
Certified for CE safety compliance.